Which product?
| KLIK – Multi-function clip-on KWh meter module
KLIK is a multi-function clip-on kWh sub-metering system delivering companies with the means of identifying potential cost reductions by showing exactly where their power is being used and therefore enabling cost effective measures to be put in place.
The KLIK system is very fast and cost effective to install, all connections are plug-in and pulse outputs can be wired in low grade cable up to distances of 1 km. Fitting is easy, supplies do not need to be isolated or cables disconnected and separate cubicles, panel cut outs and CT mounting kits are all unnecessary. Bobbin CTs can even piggy back onto the 5Amp secondaries of existing CTs or ammeter switch wiring.
Energy profile detail can be collected by Building Management System (BMS) outstations or data loggers or both. KLIK meter pulses can be wired through buildings or transmitted across site or to a web site by GSM, using additional equipment.
The KLIK 2 units display true RMS values of phase currents to identify phase imbalance. System voltage, peak demand and power factor values are all displayed together with kW and kVA demand levels and all energy registers.
KLIK V-Trac takes the concept of non-invasive installation one stage further. As well as using clip on CTs, KLIK V-Trac only needs 1 phase voltage connection. It then creates the 3 phase voltage measurement vectors in a safe, quick and very convenient way.
Sub-meter panels can be factory assembled enclosures made to order enabling CTs to be easily plugged in. Panels can also be fitted with MCBs.
|
Features: • Plug in connections
• DIN rail fitment
• Displays all measurements
• Hi peak demand alarm option
• On site multi pulse programming
• Use clip-on bobbin or Flexeclamp CTs,
• Long distance CT wiring options
|
Flexeclamp CTs are invaluable for parallel feeders or where conductor spacing is very tight.... click here for more information on our Flexeclamp range of CTs.
| |
|
